11 Mistakes To Avoid During Wavlink Extender Configuration

Setting up a Wavlink extender can greatly improve WiFi coverage and eliminate dead zones in your home or office. However, it’s important to be aware of potential pitfalls that may arise during the configuration process. In this article, we will highlight eleven common mistakes to avoid. When configuring a Wavlink extender, ensure a smooth and successful setup.

Not Reading The User Manual

Before starting the configuration process, take the time to read the user manual provided with the Wavlink extender. It contains important information and step-by-step instructions that will guide you through the setup.

Using The Wrong WiFi Password

When connecting the extender to the main router, it will ask for the WiFi password. Double-check that you are entering the correct password, as any mistake will prevent the extender from connecting to the network.

Not Disabling The Extender’s Access Point Mode

By default, Wavlink extenders are set to access point mode. If you want to use the extender to extend an existing WiFi network. Then, make sure to disable the access point mode in the settings. Failure to do so may result in conflicts and connectivity issues.

Poor Placement

One of the most common mistakes is placing the extender in a poor location. The extender should be positioned within the range of your existing WiFi network but not too far away from the main router. Avoid placing it in areas with obstructions such as walls, furniture, or electronic devices that can interfere with the signal. Find an optimal location that allows the extender to receive and transmit signals effectively.

Incorrect SSID & Password

During the configuration process, it’s essential to set up the same SSID (network name) and password as your main router. This ensures that your devices can seamlessly switch between the extender and the main router without any disruptions. Double-check the SSID and password settings to avoid mismatched credentials.

Incorrect IP settings

It’s essential to configure the extender with the correct IP settings. If you manually assign an IP address that conflicts with the main router or other devices on the network. It can result in network connectivity issues. Use the DHCP (Dynamic Host Configuration Protocol) option to automatically obtain IP settings. An IP address that is static should only be used if there is a specific reason.

Not Restarting The Devices

After completing the wifi.wavlink.com setup, restart both the Wavlink extender and the main router. This ensures that all settings are applied correctly and helps resolve any potential connectivity issues.

Overlapping WiFi channels

When setting up the extender, pay attention to the WiFi channels being used by your main router and nearby networks. Avoid selecting a channel that overlaps with other networks, as this can cause interference and reduce performance. Choose a channel that is not heavily congested.

Using The Wrong Setup Method

Wavlink extenders usually offer different setup methods, such as using a web interface or a mobile app. Make sure you choose the appropriate method for your specific model. Read the user manual or consult the manufacturer’s website to understand the correct setup procedure for your extender model.

Incorrect Connection

Ensure that you connect the extender properly to your main router. Many Wavlink extenders offer both wired and wireless connection options. If you choose the wired option, connect the extender to your router using an Ethernet cable. If you opt for the wireless option, follow the manufacturer’s instructions to connect the extender to your existing WiFi network.

Ignoring Firmware Updates

Firmware updates are crucial for enhancing the performance and security of your Wavlink extender. Ignoring these updates can lead to compatibility issues or vulnerabilities in the device. Regularly check for firmware updates on the manufacturer’s website and install that following the provided instructions. Keeping your extender’s firmware up to date will ensure optimal functionality.

Weak Security Settings

It’s vital to set up strong security settings for your Wavlink extender to protect your network from unauthorized access. Avoid using default usernames and passwords, as they are often known and can be easily exploited by attackers. Change the default login credentials and consider using WPA2 or WPA3 encryption for your WiFi network. Additionally, enabling features like MAC address filtering and disabling remote management can further enhance the security of your extender.

Note: After reading these tips if you are still facing any errors then reset your Wavlink extender. After the reset process, you need to do the wifi.wavlink.com setup again. If you don’t know the setup then follow the below steps:

Configure Your Wavlink Extender Through Web UI

Here are some tips to configure your Wavlink WiFi extender, which you can use very quickly:

First, connect your computer or mobile device to the Wavlink Extender’s WiFi network. Open a web browser and enter the extender’s default web address wifi.wavlink.com setup in the address bar. Press Enter to access the Wavlink extender’s web interface. You may prompt to enter a username and password. Once you log in, you can customize the extender’s settings, such as network name, password, and security options. Make the necessary changes, save the settings, and reboot the extender if required. Your Wavlink extender configures successfully through its web address.

We hope after reading this post you understand the things which you need to avoid during the setup procedure. But, if you are facing any other error then discuss it with our technical experts.